New 6.7L is 535hp and 520tq

[DenisC8]

New 6.7L is 535hp and 520TQ

GM's New Small-Block V-8 Changes the Game and Gives the 2027 Chevy Corvette Stingray 535 HP

The new 6.7-liter LS6 makes 535 horsepower and 520 pound-feet of torque, setting a new bar for the base Corvette Stingray.

www.caranddriver.com

 

[DenisC8]

Also 2027 stingray z51 and GS’s final drive ratio is improving from 5.17:1 to 5.56:1 while none-z51 stingrays keep the same 4.89:1 ratio

 

[CTRL_CV]

From a non-engineer, the oil filter doesn't seem to point down, so it might be more difficult to access from under the car...

 

[DenisC8]

2027 stingray z51 will be equipped with Michelin Pilot Sport S 5 tires

 

[DenisC8]

 

[JFA-Stingray]

That 6.7 works out to 409 cubes...she'll be real fine, your 409! Lingenfelter is meant to have a 427 drop-in for the Stingray,
is this a joint effort with GM or completely independent? Most likely independent, GM wouldn't want 427 Stingrays beating Z06's.
If I recall correctly, the 427 has 702 hp. and loads of torque.

 

[Vettenut]

From a non-engineer, the oil filter doesn't seem to point down, so it might be more difficult to access from under the car...

Can you elaborate on the placement of the oil filter ?

Have any pics ?

 

[CTRL_CV]

Well on the model shown you can see the oil filter doesn't point down...

 

[RayMaq88]

View attachment 139429
Well on the model shown you can see the oil filter doesn't point down...

This is way easier to remove, since your hand won't be doused with "potentially hot" oil everytime you take it off. Shouldn't be any more difficult to get off and probably easier to get a filter wrench on there.

 

[Vettenut]

This is way easier to remove, since your hand won't be doused with "potentially hot" oil everytime you take it off. Shouldn't be any more difficult to get off and probably easier to get a filter wrench on there.

Agree .... as long as they have a good size cut out / access panel ...

 

[cdnz]

Agree .... as long as they have a good size cut out / access panel ...

Or open it up some more if possible.

I did my window to access the dct filter and drain plug without having to remove the plate/under tray.