Well Murray,that puts a nice “finish” on that !! Lol !!
Eric Freeman Teak Wheel - does it need any maintenance?
- Thread starter Digigo
- Start date
ahhhhhhhh..... I wondered why it took you 31 minutes to respond fir a change Murray...Now I know.... Good post.... No wonder you are one of our most poplar members....
Sure glad I have a “stake” in this thread.
Black 03 Z06
Power User
Moderator
RIP
1
You're 10
Completionist Award
You're a Regular
King of the Post
You're Celebrated
You're Liked
Hot Chilli
Ontario
C5
Eric you are starting to teak me off.
I pine for the good old day when things were more civilized on here. Maple it is time to move on to the Pirus forum.
Eric you are starting to teak me off.
Well my friend... Life can sometimes be a beech you know.... or are you just trying to bamboozle us?
Hopefully someone can help out with the wood issue, outside of these bunch of ash-holes.
Black 03 Z06
Power User
Moderator
RIP
1
You're 10
Completionist Award
You're a Regular
King of the Post
You're Celebrated
You're Liked
Hot Chilli
Ontario
C5
You win.
I tried my best to nail down a quick response, but screw it I just cannot compete.
I tried my best to nail down a quick response, but screw it I just cannot compete.
Black 03 Z06
Power User
Moderator
RIP
1
You're 10
Completionist Award
You're a Regular
King of the Post
You're Celebrated
You're Liked
Hot Chilli
Ontario
C5
Our American friend has probably just confirmed his suspicions about Canadians and is on hold with Homeland Security.
Ha ha ha ... I'm no expert on wood but to me it looks like Ruff teak wood! 
I'm on the "fence" with this thread! Its getting rather "warped".
Black 03 Z06
Power User
Moderator
RIP
1
You're 10
Completionist Award
You're a Regular
King of the Post
You're Celebrated
You're Liked
Hot Chilli
Ontario
C5
Showed the pictures to my son. He said it is tough to tell without touching the wood but he believes it is in fact teak. He said the grain look correct to him.
Be interesting to see what your restorer says. Please let us know.
Be interesting to see what your restorer says. Please let us know.
ddgermann
Power User
Wooden you know it... open this tread and quick realize I will not be board.
Hopefully it doesn’t get to “sappy” Derek. I’m tired of “logging” in
ddgermann
Power User
Y
YFCvii
Hey who w'oak me from hibernating 
... sorry if I sound a little rasp'y myself ... 
Sorry I'm only into structural wood threads so this is knot fir me.
However when it comes to finishing, all joints wood have to be done on my wheel so that they are knot seen.
As that nuisance joint I see in the picture at 12 o'clock wood actually annoy the hell out of me if it did knot stay exactly true to 12 o'clock when driving straight.
A knot-true wheel is also nothing butt a grain-in-the-ash when at the h'elm of a boat at full throttle on water like glass.
... so I guess I wood've been best to just leaf this with I'm just knot a fan of this wheel ...
Last edited by a moderator:
‘MIKE DROP’!
Well my friends, I am going out on a limb here but at the risk of sounding knotty, I think it's clear cut that lumbering through this post has run it's mill.... So with that, lets spruce this up and allow an alder nat avenue of discussion to grow.....
Y
YFCvii
I didn't mean to go across-the-grain and can't exactly peg it down as I thought we were awl square on topic
butt I guess we struck a cord and have to be clamped down as us rough-cuts just don't fall far from the girth.
So with another notch with the count on my posts I might as well be a sap and get back to sawn wood
until the next time I log in ...
this is a dam fun thing to do ... yup ... you guys sure are awl right man
gettin this out in true CCF fashion before we get out together in our Corvettes ...... last one in the wood shop please clean up and turn off the lights ...
Last edited by a moderator:
Well guys,I work at 5am. I think its time to saw some logs.