Getting close to putting the body back on the chassis, so pressure washed the underside, so pulled the console as I am replacing/rebuilding the e-brake and shifter.
Was wondering what people are using for an undercoat, it seems to currently be a mix of 2 paints and some textured undercoat.
Should I be changing the back two mounts, this is the worst looking one.
When I pulled the console apart I found ( besides the mouse nest ) this mess of wires, green, gray and white, look to eventually go to a relay that have been cut. Thinking it may have something to do with the electric antennae?
Can't seem to find the antennae on the diagram.
Thanks for the feedback, George
Was wondering what people are using for an undercoat, it seems to currently be a mix of 2 paints and some textured undercoat.
Should I be changing the back two mounts, this is the worst looking one.
When I pulled the console apart I found ( besides the mouse nest ) this mess of wires, green, gray and white, look to eventually go to a relay that have been cut. Thinking it may have something to do with the electric antennae?
Can't seem to find the antennae on the diagram.
Thanks for the feedback, George