Has anyone switched their stock rockers to rollerized rockers on their C7 vette? What type did you use .. eg. aluminum, chrome moly, etc? I've been doing some reading and it seems the rollerized rockers allow the engine to work more efficiently by removing some of the friction. Other posts say leave the stock rockers as the roller tips are not complimentary with the stock push rods. Please chime in with your thoughts.
Rollerized rockers for C7 Z51
- Thread starter tyho
- Start date
Well, certainly if you want to change to roller rockers, you should rollerize the whole valvetrain. What's the point of roller rockers if you are going to use stock pushrods that will just eventually wear a hole into the bottom of the wheel?
