Reply to thread

Message: <blockquote data-quote="George" data-source="post: 333429" data-attributes="member: 5173">So this is the #3 passenger side mount, it is the worst of the four so I had to cut the hole thing out, sorry its rough had limited tools to do it.Just wanted to see if anybody else  has done it this way, am planning on bending some 3/16 plate to conform to the  existing channel and plug welding it to the existing structure.I realize that I will need to open the existing material up large enough so the bushing will sit on the new plates.will coat everything in Por 15 once done.All feedback is appreciated.Thanks George</blockquote>