Fast 102 Intake

[Postie]

Has anyone put one of these on, some questions
Did you have to cut into the firewall on the LS2, do you have to replace your CAI to accept the larger intake?
and what HP gains are we talking about, is it worth it?

[Nasty98]

Originally Posted by Postie

Has anyone put one of these on, some questions
Did you have to cut into the firewall on the LS2, do you have to replace your CAI to accept the larger intake?
and what HP gains are we talking about, is it worth it?

You have to do a mod to the rear of the intake to clear . It is called the Spinmoster Mod , after the guy who came up with it . I bring these in already with the mod done . You don't have to change anything about your current CAI , as well the LS2 90mm TB bolts right up , Gains of arounf 15 - 25 hp depending on your mods. It is woth it especially if you plan on further mods.

Thx
Manny@E.C.P

[not2melo]

Hum, thought these where not mountable on our cars, nice info.

[Nasty98]

Originally Posted by not2melo

Hum, thought these where not mountable on our cars, nice info.

FAST has discountinued the 92/96mm intakes and now only make the 102mm

Thx
Manny@E.C.P

[Postie]

Manny, If the 102 goes in and we end up using the 90mm TB, sounds almost like a waste, or thats not what happens when it comes to Air intake into the cylinders. I guess a little auto 101 lesson on how thats works.? lol

[not2melo]

Originally Posted by Postie

Manny, If the 102 goes in and we end up using the 90mm TB, sounds almost like a waste, or thats not what happens when it comes to Air intake into the cylinders. I guess a little auto 101 lesson on how thats works.? lol

FAST makes a 102mm TB and also Nick Williams makes a 102 & 105 TB to help flow more with the bigger intake.
There might be some other larger also, think I heard of a 110mm but not sure who makes it.

If the 90 and 92`s are no longer being made the should be able to pick one up cheaper soon.

[Nasty98]

Originally Posted by Postie

Manny, If the 102 goes in and we end up using the 90mm TB, sounds almost like a waste, or thats not what happens when it comes to Air intake into the cylinders. I guess a little auto 101 lesson on how thats works.? lol

Originally Posted by not2melo

FAST makes a 102mm TB and also Nick Williams makes a 102 & 105 TB to help flow more with the bigger intake.
There might be some other larger also, think I heard of a 110mm but not sure who makes it.

If the 90 and 92`s are no longer being made the should be able to pick one up cheaper soon.

Hi guys, we are seeing gains of up to 20 RWHP with the 102 , but nothing with the TB's oddly enough .The larger plenum volumes as well as the runner design are what contribute to the hp gains . A fast 102 with a GM 90mm is a great bolt, that will support just about any other mod you do in the future ie...cam ,heads,Fi .
The Nick Williams Tb's that are cable driven are just fine , howevere the TBW are proving to be a chanllege to tune . I beleive is the same as a post we had on this forum regarding the 80mm tb and the fact that the tip in was missing from the throat . The only 102mm and up tb that is proving to work in the TBW is the Lingenfelter .

Thx
Manny@E.C.P

[Postie]

Great Info, and with the sort of ease with bolt on stuff, ic a Fast 102 in my future. Now all i need is another Tour to follow up some of these.

[C6Vette09]

pricing for fast intakes ....

From Riley P:

Sorry C6Vette09, I removed the link as links to other Corvette forums are not allowed. This always starts a debate and rather than posting your comments or questions about this up here, please PM me. That goes for anyone else that may have questions on this as well. Please feel free to ask and I will explain further.

Thanks Everyone!!!!

[Nasty98]

As you all know FAST products are available form E.C.P with comperable pricing to US vendors .

Thx
Manny@E.C.P